Ozonator Accessories

We have got all ozonator accessories that you need to fix up, install or repair your ozonator. Parts like the injector, will actually create a suction which will then pull the ozone from the ozonator. It will then mix it with water and send it to the jets throughout the spa. You can easily take out part of the flex hose to install the injector. Find any type of clamp available to install your injector or to replace any clamps that need replacing! We also have all types of tubing available which is specifically suited for plumbing the spa air and water.

A great accessory to have when you're installing an ozonator or already have one in place is an Ozone Detection Kit. Not too long ago, one was not able to tell if the ozonator was producing the right amount of ozone or not. But now there is a simple kit that takes 30 seconds to tell you if your ozonator is functioning properly or if you actually need to replace it. Even if there are bubbles and it apprears to be running fine, it actually does not indicate an adequate O3 distribution. Some research shows that over half of homes with spa ozonators are not producing sufficient amounts of ozone or even none at all. All you have to do is insert the testing unit into the ozonator's output tubing after you have turned off your spa. Then restart it and wait for 30 seconds. After that time, you should be able to observe the results. No more guessing, just a simple test can solve all your problems.

Need ozonator accessories? Look it up on GoPoolandSpa.com! We are always available to help you find what you are looking for too.